About Us
Guangzhou Weiton is an industrial gas system manufacturer integrating scientific research and development, manufacturing, sales and service. Its three brands include Weiton Industrial Gases,
  • 发布时间: 2017 - 11 - 14
    广州维通再次入围中储粮 指定供货商2017年10月,维通再次成功入围中国储备粮管理总公司变压吸附式制氮设备指定供货商。维通2007-2017连续十年为中国绿色储粮事业提供优质、节能、高效的变压吸附制氮系统,十年间凭借先进的专业技术、过硬的产品质量以及优质的售前售后服务博得了广大储粮用户的普遍认可。能够连续入围不仅仅是中储粮总公司乃至整个粮食行业对维通的认可,同时也是公司综合实力及企业信誉的良好表现,我公司将秉承一贯的实事求是态度及良好的工作作风,认真努力地完成本次采购范围内的各项工作,为中国粮食储存绿色工程、良心工程、放心工程继续添砖加瓦!中储粮总公司粮食仓储设备招标入围项目入围结果公示:http://fwgs.sinograin.com.cn/articles/48546
  • 发布时间: 2009 - 04 - 20
    一:故障现象:    其中一塔排气不彻底原因:    1.单向阀漏气    2.反吹阀开启过大处理:    1.更换单向阀或内密封圈    2.调节反吹阀开启量 二:故障现象:    纯度下降原因:    1.吸附压力过高(0.8Mpa)    2.吸附压力过低(    3.吸附压力不稳    4.气源含水油量过多    5.进气量过大使压力上升过快    6.出气部分接口漏气    7.分子筛中毒处理:    1.减少进气压力    2.加大进气压力    3.进气口加个储罐    4.入口前加装油水分离器    5.调节入口调节阀,减少进气量。    6.取下重新插接    7.更换分子筛 三:故障现象:    氮气机不工作原因:    1.电源指示灯不亮。    2.电源插头或插座无电。处理:    1.检查保险丝是否正常(保险的位置在电源线与氮气机插座的下端)。用一字螺丝刀轻轻向外一挑就可把保险取出。有两个保险,一个在用一个备用,必要时更换...
News
Release daily information of the company, frontier information of gas industry, application knowledge of equipment industry, common faults and daily maintenance plan, etc.
  • 发布时间: 2019 - 06 - 03
    Nitrogen flowrate: 1 - 6000m³/hNitrogen purity: 95% - 99.9995% (100% - oxygen content)Dew point:  ≤- 45℃(- 70 ℃ can be customized)Nitrogen pressure: 0.5~6Bar,adjustableSuitable environment: temperature -15~45℃    humidityCompressed air conditions:Temperature: 0-30℃Pressure: 7.0-8.0Bar   Pressure dew point:Others: dust ≤ 0.01 μm   No oil, VOC and components of sulfur and nitro※Declaration when ordering if beyond the operating range※Too high temperature of the gas supplied will reduce the production capacity
  • 发布时间: 2019 - 06 - 18
    Nitrogen flowrate:1 - 6000m³/hrNitrogen purity: 95 %-99.9995 %(100 %-oxygen content)Dew point:  ≤ -45℃Nitrogen pressure: 0.05 ~ 6.5 bar, adjustableSuitable environment: temperature -15 ~ 35 ℃   humidity Conditions of compressed air:Temperature:0-30℃ Pressure:7.0-8.0Bar    Pressure dew point:Others:Dust ≤0.01μm   No oil,VOC and components of sulfur and nitro ※ Declaration when ordering if beyond the operating range.
  • 发布时间: 2019 - 06 - 18
    Oxygen flowrate:1-200m³/hOxygen purity:30%-95%Dew point: ≤-45℃Oxygen pressure: 0.01 ~ 4.0 bar, adjustableSuitable Environment: temperature -15 ~ 35 ℃   humidity Conditions of compressed air:Temperature: 0 - 25 ℃ Pressure: 4.5 - 5 bar    Pressure dew point: Other: dust ≤ 0.01 μm   No oil, VOC and components of sulfur and nitro ※ Declaration when ordering if beyond the operating range
  • 发布时间: 2019 - 06 - 18
    Oxygen flowrate:100-3000m³/hOxygen purity:30%-95%Dew point: ≤-45℃Oxygen pressure: 0.1 ~ 0.6 bar, adjustableSuitable Environment: temperature -15 ~ 35 ℃, humidity Conditions of compressed air:Temperature: 0-30℃ Pressure: 4.5-5Bar    Pressure dew point: Other: dust ≤ 0.01 μm   No oil, VOC and components of sulfur and nitro※ Declaration when ordering if beyond the operating range
  • 发布时间: 2019 - 06 - 18
    Oxygen concentration of feed:Feed pressure:0.3MPa~0.7MPaResidue index:0xygen content:≤1ppmHydrogen content ≤ 1000 ppm (Exception to hydrogen purification project)Dust:≤0.01μmDew point:≤-60℃
  • 发布时间: 2019 - 06 - 19
    To undertake manufacturing all kinds of Class D1 and D2 non-standard pressure vessels, listen to customers' requirements for pressure vessel design. With years of strong design and manufacturing capacity, tailor the most suitable products for customers. Dedicate to customers the finest, the most beautiful and the most useful products。
  • 发布时间: 2019 - 06 - 19
    Brand: Guangzhong MachineryVolume:0.3m³-75m³Working pressure:0.8MPa-8.0MPaMaterial:Q235B/Q345R/SUS304Medium: airWorking life: 10 - 30 years (Customized according to users' requirements)General accessories: relief valve, pressure gage, drain valve
  • 发布时间: 2019 - 06 - 19
    Air capacity:0.5 - 110 Nm³/min (may be customized)Inlet pressure: 0.2 - 1.0 MPa (may be customized)Inlet temperature:low-temperature type  ≤ 45 ℃, High-temperature type  ≤ 80 ℃Cooling mode: air-cooling (water-cooling)Pressure dew point : 3 - 10 ℃ (0.7 MPa)Refrigerant: R134a, R404a, R507, etc., optional Pressure loss: 0.02 MPaTemperature of cooling water: ≤ 32 ℃ (water-cooling)Pressure of cooling water: 0.2 MPa - 0.4 MPa (water-cooling)Installation environment: dry, well-ventilated, dust-free place※Declaration when ordering if beyond the operating range.
  • 发布时间: 2019 - 06 - 11
    Rated operating pressure: 0.7 - 1.0 MPa (Customized for special pressure)Rated operating pressure: 0.7 - 1.0 MPa (Customized for special pressure)Capacity1-150Nm³/minPressure loss≦0.02MPaInlet pressure0.45-1.0MPaAdsorbentAlumina/molecular sieveInlet temperature≦38℃Cycle time10min(adjustable)Inlet oil content0.08ppm(0.1mg/m³)Control modeAutomatic controlDew point of outlet gas -40~-60℃(Normal pressure)InstallationIndoor, no foundation installation is allowedDust in outlet gas≦60μmPower supply1Ph/220V/50HzAverage loss of regeneration gas10%-14%Power20-100W
  • 发布时间: 2019 - 06 - 11
    Ambient temperature℃Cooling typeAir-cooling, Water-coolingInlet pressure0.45-1.0MPaAdsorbentAlumina/molecular sieveInlet temperature≦38℃Inlet oil content0.01ppmPressure loss≦0.02MPaRefrigerantR22、R407, etcDew pointof outlet air -40~-60℃(Normal pressure)InstallationIndoor, no foundation installation is allowedDust in Outlet air≦1μmCycle time10min/1h/2h(Adjustable)Average loss of regeneration gas3%-7%Power supply3Ph/380V1Ph/220V
  • 发布时间: 2019 - 06 - 11
    Main technique parametersMain technique parametersRating capacity7-200Nm3/minPressure loss≦0.02MPaInlet pressure0.45-1.0MPaAdsorbentAlumina/molecular sieveInlet temperature≦380CRegenerative wayMicro-thermal regenerationInlet oil content0.08ppm(0.1mg/m3)Control modeAutomatic controlDew point of outlet air -40~-600C(Normal pressure)InstallationIndoor, no foundation installation is allowedDust in outlet air≦60μmPower supply1Ph/220VAverage loss of regeneration air5%-8%
  • 发布时间: 2019 - 06 - 11
    Air capacity:0.85-210Nm³/minInlet pressure:0.2MPa-1.0MPaInlet temperature:type of low temperature ≤ 45 ℃, type of high temperature ≤ 80 ℃Cooling mode: air cooling (water cooling)Pressure dew point: 2 - 10 ℃ (0.7 MPa)Refrigerant:R22Pressure loss:0.02MPaTemperature of cooling water: ≤ 32 ℃ (water cooling)Pressure of cooling water: 0.2 MPa - 0.4 MPa (water cooling)Installation environment: dry, well-ventilated, dust-free place※ Declaration when ordering if beyond the operating range.
Product Center
At present, it has a complete industrial chain of production, including: gas separation, pressure vessels, products of gas purification, products of gas refine and gas proportion, etc.
Technical centre
Release daily information of the company, frontier information of gas industry, application knowledge of equipment industry, common faults and daily maintenance plan, etc.
Contact Us
Guangzhou Weiton is located in Baiyun district of Guangzhou, there being expressway entrance/exit, near Baiyun airport, conveniently in transport. Warmly welcome you to visit the company.
Sales centre
Professional sales engineers cooperate with customers to verify and design their projects, and provide relevant technical data and data analysis. Arrange technicians to conduct preliminary relevant technical data and data analysis. Arrange technicians to conduct preliminarynal sales engineers cooperate with customers to verify and design their projects, and provide relevant technical data and data analysis. Arrange technicians to conduct preliminary relevant technical data and data analysis. Arrange technicians to conduct preliminary
  • 发布时间: 2014 - 07 - 01
    专业的研发团队,领先的科技人才,潜心向前,打造.....
  • 发布时间: 2014 - 07 - 01
    专业的研发团队,领先的科技人才,潜心向前,打造.....
  • 发布时间: 2014 - 07 - 01
    专业的研发团队,领先的科技人才,潜心向前,打造.....
solution
About Weiton

Guangzhou Weiton was founded in 1999, is a manufacturer of industrial gas systems, integrating R&D, production & manufacture and sale & service, and leads R&D of energy-saving technology in gas adsorption separation.


Weiton engages as technical consultants the authoritative scholars in the research fields of PSA, new materials and engineering thermodynamics, has set up a key laboratory with the well-known universities, has advanced digitized platforms of adsorption experiments, and tightly joins the industry-university-research, which ensures the R&D and application of our products in the technical frontier. More than 60% staffs have high-level degrees and technical qualifications, and they have been continually devoting themselves to high-end technology developments and services.



Corporate culture

Advocate the spirit of innovation, professionalism, unity and loyalty, and constantly challenge ourselves to obtain the sustainable management of the enterprise.
To customers
We provide the most value-added integrated solutions, 100% to meet the actual needs of customers.
For employees
We respect and value every employee and create a good environment for employees to realize their own value.
Co-authors
We have equality, mutual benefit, mutual support and development together.
Society
We abide by and respect the local laws and culture, and actively repay society while developing our business.

Development History

Guangzhou Weiton Industrial Gas Technology Co., Ltd.
2017
2012
2010
2009
2008
2007
2006
2005
2004
2003
2000
1999
All1/5
  • Guangzhou Weiton Industrial Gas Technology Co., Ltd.

    Guangzhou Weiton was founded in 1999, is a manufacturer of industrial gas systems, integrating R&D, production & manufacture and sale & service, and leads R&D of energy-saving technology in gas adsorption separation.


    Weiton engages as technical consultants the authoritative scholars in the research fields of PSA, new materials and engineering thermodynamics, has set up a key laboratory with the well-known universities, has advanced digitized platforms of adsorption experiments, and tightly joins the industry-university-research, which ensures the R&D and application of our products in the technical frontier. More than 60% staffs have high-level degrees and technical qualifications, and they have been continually devoting themselves to high-end technology developments and services.



  • 2017


    Guangzhou Weiton and Guangzhou Jiasheng moved to Zhongluotan town, Baiyun district, and 'successfully joined forces' with Guangzhong Machinery.

    2017年

  • 2012

    The energy saving level of nitrogen producing system was increased by another 10%

  • 2010

    Nitrogen producing systems of energy saving 10% were used for green grain storage.

    More than 100 nitrogen-producing systems have been used in grain industry.

    2010年


  • 2009

    Became the qualified supplier of China Grain Reserves Group Ltd. Company

  • 2008

    Shareholder of Guangzhong Machinery, and had design and manufacture qualification of Class I and II pressure vessels.


  • 2007

    The first supplier of green nitrogen-conditioning system for China Grain Reserves Corp.

    2007年

  • 2006

    Cooperated closely with universities, and set up a professional test system for gas separation, and energy saving was advanced to a high level.

  • 2005

    A high-purity nitrogen-producing system was developed successfully for crystal chip industry, and has been operating in Hong Kong RCL company for more than 10 years without any attenuation.

    2005年

  • 2004

     Numerous nitrogen-producing systems were used in SMT industry

    2004年

  • 2003

    Purchased and established Guangzhou Jiasheng Purifying Equipment co., LTD2003年


  • 2000

    A super-large PSA nitrogen system with carbon-removedg oxygen operated successfully for soft magnetic industry. 

    2000年

  • 1999

    Guangzhou Weiton was founded, a professional company of PSA gas separation in South China.

    1999年


2017
● Guangzhou Weitong, Guangzhou Jiasheng relocated to Zhongluotan Town, Baiyun District, and joined Guangzhou Machinery Successfully.
2012
● Energy-saving level of nitrogen-making system is increased by 10% again.
2010
● Application of 10% energy-saving nitrogen-making system in green grain storage
● More than 100 nitrogen production systems used in grain industry
2009
● Qualified Suppliers of China Central Grain Reserve Management Corporation
2008
● Holding a wide range of machinery, with one or two types of pressure vessel design and manufacturing qualifications
2007
● First batch supplier of central grain reserve green nitrogen air conditioning system
2006
● Closely cooperate with colleges and universities to create a specialized gas separation test system, which can save energy to a new level.
2005
● The system has been successfully developed for high purity nitrogen production in crystal element industry,
and has been operated for more than 10 years at "0" attenuation of RCL Company in Hong Kong.
2004
● Mass Nitrogen Production System Applied in SMT Industry
2003
● Acquisition and Establishment of Guangzhou Jiasheng Purification Equipment Co., Ltd.

2000
● Successful Operation of Super Large Carbon Deoxidization PSA Nitrogen Making System in Soft Magnetic Industry
1999
● South China Specialized Gas Separation Company for PSA--Guangzhou Weitong Established
Copyright (2019-2021) Guangzhou Weiton Industrial Gas Technology Co., Ltd.
Rhino Cloud Provides Enterprise Cloud Services
犀牛云提供云计算服务
X
3

SKYPE 设置

4

Ali Wangwang

2

MSN设置

5

Mobile

  • 020-84569638
6

QR code

等待加载动态数据...

等待加载动态数据...

TOP
展开