Gas Storage Tank - Gas Storage Tank - Guangzhou Weitong Industrial Gas Technology Co., Ltd.

中文版

服务热线: 13503031632

Guangzhou Weitong Industrial Gas Technology Co., Ltd.

About Us

Guangzhou Weiton is an industrial gas system manufacturer integrating scientific research and development, manufacturing, sales and service. Its three brands include Weiton Industrial Gases,

广州维通再次入围中储粮指定供货商

发布时间： 2017 - 11 - 14

广州维通再次入围中储粮指定供货商2017年10月，维通再次成功入围中国储备粮管理总公司变压吸附式制氮设备指定供货商。维通2007-2017连续十年为中国绿色储粮事业提供优质、节能、高效的变压吸附制氮系统，十年间凭借先进的专业技术、过硬的产品质量以及优质的售前售后服务博得了广大储粮用户的普遍认可。能够连续入围不仅仅是中储粮总公司乃至整个粮食行业对维通的认可，同时也是公司综合实力及企业信誉的良好表现，我公司将秉承一贯的实事求是态度及良好的工作作风，认真努力地完成本次采购范围内的各项工作，为中国粮食储存绿色工程、良心工程、放心工程继续添砖加瓦！中储粮总公司粮食仓储设备招标入围项目入围结果公示：http://fwgs.sinograin.com.cn/articles/48546

More

制氮机常见故障及处理

发布时间： 2009 - 04 - 20

一：故障现象: 其中一塔排气不彻底原因: 1.单向阀漏气 2.反吹阀开启过大处理: 1.更换单向阀或内密封圈 2.调节反吹阀开启量二：故障现象: 纯度下降原因: 1.吸附压力过高(0.8Mpa) 2.吸附压力过低( 3.吸附压力不稳 4.气源含水油量过多 5.进气量过大使压力上升过快 6.出气部分接口漏气 7.分子筛中毒处理: 1.减少进气压力 2.加大进气压力 3.进气口加个储罐 4.入口前加装油水分离器 5.调节入口调节阀，减少进气量。 6.取下重新插接 7.更换分子筛三：故障现象: 氮气机不工作原因: 1.电源指示灯不亮。 2.电源插头或插座无电。处理: 1.检查保险丝是否正常（保险的位置在电源线与氮气机插座的下端）。用一字螺丝刀轻轻向外一挑就可把保险取出。有两个保险，一个在用一个备用，必要时更换...

More

News

Release daily information of the company, frontier information of gas industry, application knowledge of equipment industry, common faults and daily maintenance plan, etc.

Nitrogen producing devices

发布时间： 2019 - 06 - 03

Nitrogen flowrate: 1 - 6000m³/hNitrogen purity: 95% - 99.9995% （100% - oxygen content）Dew point: ≤- 45℃（- 70 ℃ can be customized）Nitrogen pressure: 0.5~6Bar，adjustableSuitable environment: temperature -15～45℃ humidityCompressed air conditions:Temperature: 0-30℃Pressure: 7.0-8.0Bar Pressure dew point:Others: dust ≤ 0.01 μm No oil, VOC and components of sulfur and nitro※Declaration when ordering if beyond the operating range※Too high temperature of the gas supplied will reduce the production capacity

More
Nitrogen Producing System Specially for Green Grain Storage

发布时间： 2019 - 06 - 18

Nitrogen flowrate:1 - 6000m³/hrNitrogen purity: 95 %-99.9995 %（100 %-oxygen content）Dew point: ≤ -45℃Nitrogen pressure: 0.05 ~ 6.5 bar, adjustableSuitable environment: temperature -15 ~ 35 ℃ humidity Conditions of compressed air:Temperature：0-30℃ Pressure：7.0-8.0Bar Pressure dew point：Others：Dust ≤0.01μm No oil,VOC and components of sulfur and nitro ※ Declaration when ordering if beyond the operating range.

More
Oxygen-producing devices

发布时间： 2019 - 06 - 18

Oxygen flowrate：1-200m³/hOxygen purity：30%-95%Dew point： ≤-45℃Oxygen pressure: 0.01 ~ 4.0 bar, adjustableSuitable Environment: temperature -15 ~ 35 ℃ humidity Conditions of compressed air：Temperature: 0 - 25 ℃ Pressure: 4.5 - 5 bar Pressure dew point: Other: dust ≤ 0.01 μm No oil, VOC and components of sulfur and nitro ※ Declaration when ordering if beyond the operating range

More
VPSA Oxygen Generator

发布时间： 2019 - 06 - 18

Oxygen flowrate：100-3000m³/hOxygen purity：30%-95%Dew point： ≤-45℃Oxygen pressure: 0.1 ~ 0.6 bar, adjustableSuitable Environment: temperature -15 ~ 35 ℃, humidity Conditions of compressed air：Temperature: 0-30℃ Pressure: 4.5-5Bar Pressure dew point: Other: dust ≤ 0.01 μm No oil, VOC and components of sulfur and nitro※ Declaration when ordering if beyond the operating range

More
Purifying device of hydrogen-removed oxygen

发布时间： 2019 - 06 - 18

Oxygen concentration of feed：Feed pressure：0.3MPa～0.7MPaResidue index:0xygen content：≤1ppmHydrogen content ≤ 1000 ppm (Exception to hydrogen purification project)Dust：≤0.01μmDew point：≤-60℃

More

Customization of Pressure vessels

发布时间： 2019 - 06 - 19

To undertake manufacturing all kinds of Class D1 and D2 non-standard pressure vessels, listen to customers' requirements for pressure vessel design. With years of strong design and manufacturing capacity, tailor the most suitable products for customers. Dedicate to customers the finest, the most beautiful and the most useful products。

More
Gas Storage Tank

发布时间： 2019 - 06 - 19

Brand: Guangzhong MachineryVolume：0.3m³-75m³Working pressure：0.8MPa-8.0MPaMaterial：Q235B/Q345R/SUS304Medium: airWorking life: 10 - 30 years (Customized according to users' requirements)General accessories: relief valve, pressure gage, drain valve

More

Environment-protecting refrigerating dryer

发布时间： 2019 - 06 - 19

Air capacity：0.5 - 110 Nm³/min (may be customized)Inlet pressure: 0.2 - 1.0 MPa (may be customized)Inlet temperature：low-temperature type ≤ 45 ℃, High-temperature type ≤ 80 ℃Cooling mode: air-cooling (water-cooling)Pressure dew point : 3 - 10 ℃ (0.7 MPa)Refrigerant: R134a, R404a, R507, etc., optional Pressure loss: 0.02 MPaTemperature of cooling water: ≤ 32 ℃ (water-cooling)Pressure of cooling water: 0.2 MPa - 0.4 MPa (water-cooling)Installation environment: dry, well-ventilated, dust-free place※Declaration when ordering if beyond the operating range.

More
Non-thermal adsorption dryer

发布时间： 2019 - 06 - 11

Rated operating pressure: 0.7 - 1.0 MPa (Customized for special pressure)Rated operating pressure: 0.7 - 1.0 MPa (Customized for special pressure)Capacity1-150Nm³/minPressure loss≦0.02MPaInlet pressure0.45-1.0MPaAdsorbentAlumina/molecular sieveInlet temperature≦38℃Cycle time10min（adjustable）Inlet oil content0.08ppm(0.1mg/m³)Control modeAutomatic controlDew point of outlet gas -40～-60℃(Normal pressure)InstallationIndoor, no foundation installation is allowedDust in outlet gas≦60μmPower supply1Ph/220V/50HzAverage loss of regeneration gas10%-14%Power20-100W

More
Combination adsorption dryer

发布时间： 2019 - 06 - 11

Ambient temperature℃Cooling typeAir-cooling, Water-coolingInlet pressure0.45-1.0MPaAdsorbentAlumina/molecular sieveInlet temperature≦38℃Inlet oil content0.01ppmPressure loss≦0.02MPaRefrigerantR22、R407, etcDew pointof outlet air -40～-60℃(Normal pressure)InstallationIndoor, no foundation installation is allowedDust in Outlet air≦1μmCycle time10min/1h/2h(Adjustable）Average loss of regeneration gas3%-7%Power supply3Ph/380V1Ph/220V

More
Micro-thermal adsorption dryer

发布时间： 2019 - 06 - 11

Main technique parametersMain technique parametersRating capacity7-200Nm3/minPressure loss≦0.02MPaInlet pressure0.45-1.0MPaAdsorbentAlumina/molecular sieveInlet temperature≦380CRegenerative wayMicro-thermal regenerationInlet oil content0.08ppm(0.1mg/m3)Control modeAutomatic controlDew point of outlet air -40～-600C(Normal pressure)InstallationIndoor, no foundation installation is allowedDust in outlet air≦60μmPower supply1Ph/220VAverage loss of regeneration air5%-8%

More
Refrigerating dryer

发布时间： 2019 - 06 - 11

Air capacity：0.85-210Nm³/minInlet pressure：0.2MPa-1.0MPaInlet temperature：type of low temperature ≤ 45 ℃, type of high temperature ≤ 80 ℃Cooling mode: air cooling (water cooling)Pressure dew point: 2 - 10 ℃ (0.7 MPa)Refrigerant：R22Pressure loss：0.02MPaTemperature of cooling water: ≤ 32 ℃ (water cooling)Pressure of cooling water: 0.2 MPa - 0.4 MPa (water cooling)Installation environment: dry, well-ventilated, dust-free place※ Declaration when ordering if beyond the operating range.

More

Product Center

At present, it has a complete industrial chain of production, including: gas separation, pressure vessels, products of gas purification, products of gas refine and gas proportion, etc.

Technical centre

Release daily information of the company, frontier information of gas industry, application knowledge of equipment industry, common faults and daily maintenance plan, etc.

Guangzhou Weiton is located in Baiyun district of Guangzhou, there being expressway entrance/exit, near Baiyun airport, conveniently in transport. Warmly welcome you to visit the company.

Sales centre

Professional sales engineers cooperate with customers to verify and design their projects, and provide relevant technical data and data analysis. Arrange technicians to conduct preliminary relevant technical data and data analysis. Arrange technicians to conduct preliminarynal sales engineers cooperate with customers to verify and design their projects, and provide relevant technical data and data analysis. Arrange technicians to conduct preliminary relevant technical data and data analysis. Arrange technicians to conduct preliminary

实验装备

发布时间： 2014 - 07 - 01

专业的研发团队，领先的科技人才,潜心向前，打造.....

More

测试能力

发布时间： 2014 - 07 - 01

专业的研发团队，领先的科技人才,潜心向前，打造.....

More
技术研发

发布时间： 2014 - 07 - 01

专业的研发团队，领先的科技人才,潜心向前，打造.....

More

solution

Your present position: Home > Product Center > Pressure Vessel > Gas Storage Tank

Gas Storage Tank

Introduce： 1、The role of the gas storage tank The air storage tank is used to store a certain amount of compressed air in gas transport systems, and to surge and balance the pressure at the same time. The temperature of the gas can be lowered through the gas storage tank, and the water moisture, oil ingredient and mechanical impurities in the compressed air can be partly separated.

PDF Down Consultation

parameter

Brand: Guangzhong Machinery

Volume：0.3m³-75m³

Working pressure：0.8MPa-8.0MPa

Material：Q235B/Q345R/SUS304

Medium: air

Working life: 10 - 30 years (Customized according to users' requirements)

General accessories: relief valve, pressure gage, drain valve

principle

1、The role of the gas storage tank

The air storage tank is used to store a certain amount of compressed air in gas transport systems, and to surge and balance the pressure at the same time. The temperature of the gas can be lowered through the gas storage tank, and the water moisture, oil ingredient and mechanical impurities in the compressed air can be partly separated.

Technology

Sketch dimension of gas storage tank

储气罐

To configure

An air storage tank is made of parts and blocks, shell, sealing head, flange, pipe, sealing element, support, etc., and supplemented with accessories of relief valves, pressure gauges, drain valves to play the role of the functions in different producing processes.

Introduce

Specification of vertical low-pressure tanks（0.8～1.6MPa） Table 1

NO.	specification	design temperature℃	Height H1	Inside diameter φ	Inlet			Outlet			Support		Relief valve connector	Drain Outlet
	Volume/working pressure				H2	DN	Thread	H3	DN	Thread	D	n×d
1	0.3/0.8*	110	1485	550	500	50	G1^1/2	1100	50	G1^1/2	415	3×18	G1/2	G1/2
2	0.3/1.0*		1485		500			1100
3	0.3/1.3*		1485		500			1100
4	0.3/1.6		1488		500			1100
5	0.6/0.8*	110	2100	650	627	65	G1^1/2	1637	65	G1^1/2	450	3×18	G1/2	G1/2
6	0.6/1.0*		2100		627			1637
7	0.6/1.3*		2100		627			1637
8	0.6/1.6		2100		627			1637
9	1.0/0.8*	110	2200	800	690	65	G1^1/2	1700	65	G1^1/2	560	3×24	G3/4	G1/2
10	1.0/1.0*		2200		690			1700
11	1.0/1.3		2200		690			1700
12	1.0/1.6		2200		690			1700
13	1.5/0.8	110	2743	900	760	65	G1^1/2	2260	65	G11/2	630	3×24	G1	G3/4
14	1.5/1.0		2743		760			2260
15	1.5/1.3		2743		760			2260
16	1.5/1.6		2743		760			2260
17	2.0/0.8	110	2810	1000	750	80	G2	2300	80	G2	700	3×24	G1	G3/4
18	2.0/1.0		2810		750			2300
19	2.0/1.3		2810		750			2300
20	2.0/1.6		2810		750			2300
21	2.5/0.8	110	2890	1100	815	80	/	2315	80	/	800	3×24	G1^1/4	G3/4
22	2.5/1.0		2890		815			2315
23	2.5/1.3		2890		815			2315
24	2.5/1.6		2890		815			2315
25	3.0/0.8	110	2970	1200	860	80	/	2360	80	/	840	3×24	G1^1/2	G3/4
26	3.0/1.0		2970		860			2360
27	3.0/1.3		2970		860			2360
28	3.0/1.6		2970		860			2360
29	4.0/0.8	110	3045	1400	1015	100	/	2215	100	/	1050	3×24	G1^1/2	G1
30	4.0/1.0		3045		1015			2215
31	4.0/1.3		3045		1015			2215
32	4.0/1.6		3045		1015			2215
33	5.0/0.8	110	3640	1400	1015	100	/	2815	100	/	1050	3×24	G2	G1
34	5.0/1.0		3640		1015			2815
35	5.0/1.3		3640		1015			2815
36	5.0/1.6		3640		1015			2815

Specification of vertical low-pressure tanks （0.8～1.6MPa） Table 2

NO.	specification	design temperature ℃	Height H1	inside diameter φ	Inlet		Outlet		support		relief valve connector	drain Outlet
	Volume/working pressure				H2	DN	H3	DN	D	n×d
37	6.0/0.8	110	3840	1500	1140	125	2940	125	1100	3×32	G2	G1
38	6.0/1.0		3840		1140		2940
39	6.0/1.3		3840		1140		2940
40	6.0/1.6		3840		1140		2940
41	8.0/0.8	110	4420	1600	1315	125	3315	125	1200	4×32	G2-1/2	G1
42	8.0/1.0		4420		1315		3315
43	8.0/1.3		4420		1315		3315
44	8.0/1.6		4420		1315		3315
45	10/0.8	110	4455	1800	1312	150	3272	150	1350	4×32	G2-1/2	G1
46	10/1.0		4455		1312		3272
47	10/1.3		4455		1312		3272
48	10/1.6		4455		1312		3272
49	12/0.8	110	4435	2000	1340	150	3300	150	1500	4×32	G2-1/2	G1
50	12/1.0		4435		1340		3300
51	12/1.3		4435		1340		3300
52	12/1.6		4435		1340		3300
53	15/0.8	110	4560	2200	1208	150	3528	150	1470	8×24	G2-1/2	G1
54	15/1.0		4560		1208		3528
55	15/1.3		4560		1208		3528
56	15/1.6		4560		1208		3528
57	20/0.8	110	4755	2500	1405	200	3505	200	1640	8×24	DN80	G1
58	20/1.0		4755		1405		3505
59	20/1.3		4755		1405		3505
60	20/1.6		4755		1405		3505
61	25/0.8	110	5720	2500	1405	200	4105	200	1640	8×24	DN80	G1
62	25/1.0		5720		1405		4105
63	25/1.3		5720		1405		4105
64	25/1.6		5720		1405		4105
65	30/0.8	110	6680	2500	1455	200	5405	200	1640	8×24	DN80	G1
66	30/1.0		6680		1455		5405
67	30/1.3		6680		1455		5405
68	30/1.6		6680		1455		5405
69	40/0.8	110	8950	2500	1455	200	7455	200	1640	8×24	DN80	G1
70	40/1.0		8950		1455		7455
71	40/1.3		8950		1455		7455

1、 The company reserves the right to change the design and specification of all products without prior notice。

2、 The material of the cylinder shells of this series is carbon steel (Q235B, Q345R) or stainless steel (S30408, S31603)。

3、 The models with marker * are simple pressure vessels (no registration required)。

Specification of vertical medium-pressure tanks （2.5～4.0MPa） Table 3

NO.	specification	design temperature ℃	Height H1	inside diameter φ	Inlet		Outlet		support
NO.	Volume/working pressure	design temperature ℃	Height H1	inside diameter φ	H2	DN	H3	DN	D	n×d
1	0.3/2.5	110	1600	550	525	50	1225	50	415	3×18
2	0.3/3.0		1600		525		1225
3	0.3/4.0		1600		525		1225
4	0.6/2.5	110	1860	700	640	65	1390	65	450	3×18
5	0.6/3.0		1860		640		1390
6	0.6/4.0		1860		640		1390
7	1.0/2.5	110	2200	800	700	65	1700	65	560	3×24
8	1.0/3.0		2200		700		1700
9	1.0/4.0		2200		700		1700
10	1.5/0.8	110	2822	900	760	65	2160	65	630	3×24
11	1.5/2.5		2822		760		2160
12	1.5/3.0		2822		760		2160
13	1.5/4.0		2822		760		2160
14	2.0/2.5	110	2890	1000	760	80	2260	80	700	3×24
15	2.0/3.0		2890		760		2260
16	2.0/4.0		2890		760		2260
17	3.0/2.5	110	2970	1200	860	80	2360	80	840	3×24
18	3.0/3.0		2970		860		2360
19	3.0/4.0		2970		860		2360
20	4.0/2.5	110	3070	1400	1015	100	2215	100	1050	3×24
21	4.0/3.0		3070		1015		2215
22	4.0/4.0		3070		1015		2215
23	5.0/2.5	110	3750	1400	1015	100	2815	100	1050	3×24
24	5.0/3.0		3750		1015		2815
25	5.0/4.0		3750		1015		2815
26	6.0/2.5	110	3900	1500	1140	125	3040	125	1100	3×32
27	6.0/3.0		3900		1140		3040
28	6.0/4.0		3900		1140		3040
29	8.0/2.5	110	4420	1600	1355	150	3315	150	1350	4×32
30	8.0/3.0		4420		1355		3315
31	8.0/4.0		4420		1355		3315
32	10/2.5	110	4550	1800	1352	150	3252	150	1350	4×32
33	10/3.0		4550		1352		3252
34	10/4.0		4550		1352		3252

注：1、本公司将保留对所有产品的外观设计和规格进行变更的权利，恕不另行通知。

2、本系列储气罐筒体材料为碳钢(Q235-B、Q345R)或不锈钢(S30408、S31603)。

Previous: NoneNext: None

QQ

Mobile

13503031632

QR code

等待加载动态数据...

TOP

展开

QQ

SKYPE 设置

Ali Wangwang

MSN设置

Mobile

QR code

等待加载动态数据...