服务热线: 13503031632
About Us
Guangzhou Weiton is an industrial gas system manufacturer integrating scientific research and development, manufacturing, sales and service. Its three brands include Weiton Industrial Gases,
  • 发布时间: 2017 - 11 - 14
    广州维通再次入围中储粮 指定供货商2017年10月,维通再次成功入围中国储备粮管理总公司变压吸附式制氮设备指定供货商。维通2007-2017连续十年为中国绿色储粮事业提供优质、节能、高效的变压吸附制氮系统,十年间凭借先进的专业技术、过硬的产品质量以及优质的售前售后服务博得了广大储粮用户的普遍认可。能够连续入围不仅仅是中储粮总公司乃至整个粮食行业对维通的认可,同时也是公司综合实力及企业信誉的良好表现,我公司将秉承一贯的实事求是态度及良好的工作作风,认真努力地完成本次采购范围内的各项工作,为中国粮食储存绿色工程、良心工程、放心工程继续添砖加瓦!中储粮总公司粮食仓储设备招标入围项目入围结果公示:http://fwgs.sinograin.com.cn/articles/48546
  • 发布时间: 2009 - 04 - 20
    一:故障现象:    其中一塔排气不彻底原因:    1.单向阀漏气    2.反吹阀开启过大处理:    1.更换单向阀或内密封圈    2.调节反吹阀开启量 二:故障现象:    纯度下降原因:    1.吸附压力过高(0.8Mpa)    2.吸附压力过低(    3.吸附压力不稳    4.气源含水油量过多    5.进气量过大使压力上升过快    6.出气部分接口漏气    7.分子筛中毒处理:    1.减少进气压力    2.加大进气压力    3.进气口加个储罐    4.入口前加装油水分离器    5.调节入口调节阀,减少进气量。    6.取下重新插接    7.更换分子筛 三:故障现象:    氮气机不工作原因:    1.电源指示灯不亮。    2.电源插头或插座无电。处理:    1.检查保险丝是否正常(保险的位置在电源线与氮气机插座的下端)。用一字螺丝刀轻轻向外一挑就可把保险取出。有两个保险,一个在用一个备用,必要时更换...
News
Release daily information of the company, frontier information of gas industry, application knowledge of equipment industry, common faults and daily maintenance plan, etc.
  • 发布时间: 2019 - 06 - 03
    Nitrogen flowrate: 1 - 6000m³/hNitrogen purity: 95% - 99.9995% (100% - oxygen content)Dew point:  ≤- 45℃(- 70 ℃ can be customized)Nitrogen pressure: 0.5~6Bar,adjustableSuitable environment: temperature -15~45℃    humidityCompressed air conditions:Temperature: 0-30℃Pressure: 7.0-8.0Bar   Pressure dew point:Others: dust ≤ 0.01 μm   No oil, VOC and components of sulfur and nitro※Declaration when ordering if beyond the operating range※Too high temperature of the gas supplied will reduce the production capacity
  • 发布时间: 2019 - 06 - 18
    Nitrogen flowrate:1 - 6000m³/hrNitrogen purity: 95 %-99.9995 %(100 %-oxygen content)Dew point:  ≤ -45℃Nitrogen pressure: 0.05 ~ 6.5 bar, adjustableSuitable environment: temperature -15 ~ 35 ℃   humidity Conditions of compressed air:Temperature:0-30℃ Pressure:7.0-8.0Bar    Pressure dew point:Others:Dust ≤0.01μm   No oil,VOC and components of sulfur and nitro ※ Declaration when ordering if beyond the operating range.
  • 发布时间: 2019 - 06 - 18
    Oxygen flowrate:1-200m³/hOxygen purity:30%-95%Dew point: ≤-45℃Oxygen pressure: 0.01 ~ 4.0 bar, adjustableSuitable Environment: temperature -15 ~ 35 ℃   humidity Conditions of compressed air:Temperature: 0 - 25 ℃ Pressure: 4.5 - 5 bar    Pressure dew point: Other: dust ≤ 0.01 μm   No oil, VOC and components of sulfur and nitro ※ Declaration when ordering if beyond the operating range
  • 发布时间: 2019 - 06 - 18
    Oxygen flowrate:100-3000m³/hOxygen purity:30%-95%Dew point: ≤-45℃Oxygen pressure: 0.1 ~ 0.6 bar, adjustableSuitable Environment: temperature -15 ~ 35 ℃, humidity Conditions of compressed air:Temperature: 0-30℃ Pressure: 4.5-5Bar    Pressure dew point: Other: dust ≤ 0.01 μm   No oil, VOC and components of sulfur and nitro※ Declaration when ordering if beyond the operating range
  • 发布时间: 2019 - 06 - 18
    Oxygen concentration of feed:Feed pressure:0.3MPa~0.7MPaResidue index:0xygen content:≤1ppmHydrogen content ≤ 1000 ppm (Exception to hydrogen purification project)Dust:≤0.01μmDew point:≤-60℃
  • 发布时间: 2019 - 06 - 19
    To undertake manufacturing all kinds of Class D1 and D2 non-standard pressure vessels, listen to customers' requirements for pressure vessel design. With years of strong design and manufacturing capacity, tailor the most suitable products for customers. Dedicate to customers the finest, the most beautiful and the most useful products。
  • 发布时间: 2019 - 06 - 19
    Brand: Guangzhong MachineryVolume:0.3m³-75m³Working pressure:0.8MPa-8.0MPaMaterial:Q235B/Q345R/SUS304Medium: airWorking life: 10 - 30 years (Customized according to users' requirements)General accessories: relief valve, pressure gage, drain valve
  • 发布时间: 2019 - 06 - 19
    Air capacity:0.5 - 110 Nm³/min (may be customized)Inlet pressure: 0.2 - 1.0 MPa (may be customized)Inlet temperature:low-temperature type  ≤ 45 ℃, High-temperature type  ≤ 80 ℃Cooling mode: air-cooling (water-cooling)Pressure dew point : 3 - 10 ℃ (0.7 MPa)Refrigerant: R134a, R404a, R507, etc., optional Pressure loss: 0.02 MPaTemperature of cooling water: ≤ 32 ℃ (water-cooling)Pressure of cooling water: 0.2 MPa - 0.4 MPa (water-cooling)Installation environment: dry, well-ventilated, dust-free place※Declaration when ordering if beyond the operating range.
  • 发布时间: 2019 - 06 - 11
    Rated operating pressure: 0.7 - 1.0 MPa (Customized for special pressure)Rated operating pressure: 0.7 - 1.0 MPa (Customized for special pressure)Capacity1-150Nm³/minPressure loss≦0.02MPaInlet pressure0.45-1.0MPaAdsorbentAlumina/molecular sieveInlet temperature≦38℃Cycle time10min(adjustable)Inlet oil content0.08ppm(0.1mg/m³)Control modeAutomatic controlDew point of outlet gas -40~-60℃(Normal pressure)InstallationIndoor, no foundation installation is allowedDust in outlet gas≦60μmPower supply1Ph/220V/50HzAverage loss of regeneration gas10%-14%Power20-100W
  • 发布时间: 2019 - 06 - 11
    Ambient temperature℃Cooling typeAir-cooling, Water-coolingInlet pressure0.45-1.0MPaAdsorbentAlumina/molecular sieveInlet temperature≦38℃Inlet oil content0.01ppmPressure loss≦0.02MPaRefrigerantR22、R407, etcDew pointof outlet air -40~-60℃(Normal pressure)InstallationIndoor, no foundation installation is allowedDust in Outlet air≦1μmCycle time10min/1h/2h(Adjustable)Average loss of regeneration gas3%-7%Power supply3Ph/380V1Ph/220V
  • 发布时间: 2019 - 06 - 11
    Main technique parametersMain technique parametersRating capacity7-200Nm3/minPressure loss≦0.02MPaInlet pressure0.45-1.0MPaAdsorbentAlumina/molecular sieveInlet temperature≦380CRegenerative wayMicro-thermal regenerationInlet oil content0.08ppm(0.1mg/m3)Control modeAutomatic controlDew point of outlet air -40~-600C(Normal pressure)InstallationIndoor, no foundation installation is allowedDust in outlet air≦60μmPower supply1Ph/220VAverage loss of regeneration air5%-8%
  • 发布时间: 2019 - 06 - 11
    Air capacity:0.85-210Nm³/minInlet pressure:0.2MPa-1.0MPaInlet temperature:type of low temperature ≤ 45 ℃, type of high temperature ≤ 80 ℃Cooling mode: air cooling (water cooling)Pressure dew point: 2 - 10 ℃ (0.7 MPa)Refrigerant:R22Pressure loss:0.02MPaTemperature of cooling water: ≤ 32 ℃ (water cooling)Pressure of cooling water: 0.2 MPa - 0.4 MPa (water cooling)Installation environment: dry, well-ventilated, dust-free place※ Declaration when ordering if beyond the operating range.
Product Center
At present, it has a complete industrial chain of production, including: gas separation, pressure vessels, products of gas purification, products of gas refine and gas proportion, etc.
Technical centre
Release daily information of the company, frontier information of gas industry, application knowledge of equipment industry, common faults and daily maintenance plan, etc.
Contact Us
Guangzhou Weiton is located in Baiyun district of Guangzhou, there being expressway entrance/exit, near Baiyun airport, conveniently in transport. Warmly welcome you to visit the company.
Sales centre
Professional sales engineers cooperate with customers to verify and design their projects, and provide relevant technical data and data analysis. Arrange technicians to conduct preliminary relevant technical data and data analysis. Arrange technicians to conduct preliminarynal sales engineers cooperate with customers to verify and design their projects, and provide relevant technical data and data analysis. Arrange technicians to conduct preliminary relevant technical data and data analysis. Arrange technicians to conduct preliminary
  • 发布时间: 2014 - 07 - 01
    专业的研发团队,领先的科技人才,潜心向前,打造.....
  • 发布时间: 2014 - 07 - 01
    专业的研发团队,领先的科技人才,潜心向前,打造.....
  • 发布时间: 2014 - 07 - 01
    专业的研发团队,领先的科技人才,潜心向前,打造.....
solution
Purification device of carbon-removed oxygen
Introduce: When ordinary nitrogen gas containing oxygen less than 0.1 % flows into the oxygen remover, the oxygen reacts sufficiently with the carbon in the carbon-carrying deoxidant at high temperature to form carbon dioxide (C + O2 = CO2), and the content of residual oxygen may reach below 10 ppm.After removing oxygen, the nitrogen gas flows through a cooler to decrease temperature and then into the dryers in which carbon dioxide and residual moisture are deeply removed. The dryers are two adsorbers packed with molecular sieve, one of them is adsorbing to dry the nitrogen gas, and the other, having adsorbed in saturation, is regenerated at high temperature. The normal-pressure dew point of the nitrogen gas can finally reach less than -60 ℃.The gas purified is conveyed through a pure nitrogen tank and then to nitrogen-using spots.
PDF Down Consultation
parameter

Oxygen content of feed:<0.1%

Feed pressure:0.2MPa~0.7MPa

Residue index:

Oxygen content:≤10ppm

CO2 content:≤100ppm

Dust:≤0.01μm

Dew point at normal pressure:≤-60℃


principle

When ordinary nitrogen gas containing oxygen less than 0.1 % flows into the oxygen remover, the oxygen reacts sufficiently with the carbon in the carbon-carrying deoxidant at high temperature to form carbon dioxide (C + O2 = CO2), and the content of residual oxygen may reach below 10 ppm.

After removing oxygen, the nitrogen gas flows through a cooler to decrease temperature and then into the dryers in which carbon dioxide and residual moisture are deeply removed. The dryers are two adsorbers packed with molecular sieve, one of them is adsorbing to dry the nitrogen gas, and the other, having adsorbed in saturation, is regenerated at high temperature. The normal-pressure dew point of the nitrogen gas can finally reach less than -60 ℃.

The gas purified is conveyed through a pure nitrogen tank and then to nitrogen-using spots.


Technology

碳脱氧纯化装置

Ordinary nitrogen gas flows into the oxygen remover packed with the carbon-carrying deoxidant. The oxygen reacts with the carbon at 300 ~ 350 ℃ to form carbon dioxide, and consequently to make the oxygen vanish. There are two oxygen removers in the system, one as a standby, and the other being working for almost one month. Carbon dioxide and moisture in the gas out of the oxygen remover are adsorbed in a molecular sieve dryer. The dryer works at normal temperature and is regenerated at high temperature. After drying, the nitrogen gas contains oxygen and carbon dioxide less than 1 ppm, and moisture less than 10 ppm. Warnings of low temperature, low pressure and nitrogen purity are organized for the oxygen removers in order to effectively monitor the system.

The scope of application

The system is applicable to the cases of strictly restricting the content of oxygen and hydrogen.


To configure


Standard functions High functions
Oxygen remover
Heater
One-stage heat exchanger
Two-stage heat exchanger
Dryer (manual)
Dryer (automatic)
Filter
Oxygen analyzer


Advantages of purification with carbon-removed oxygen:

    ① High reliability: the system is operate at temperature of 250 ~ 350 ℃, at which the operation is not affected by the other equipment. High-purity nitrogen is steadily supplied automatically; 

    ② High industrial safety: the reaction of oxygen and deoxidant forms inactive gas which does not endanger industrial safety at low pressure and not very high temperature; 

    ③ High-quality nitrogen: the impurities, inactive gas from the reaction of oxygen and deoxidant, and moisture etc., can be treated reasonably, which ensures the quality of product nitrogen.

 

Disadvantages of purification with carbon-removed oxygen:

    ① Manufacturing costs are higher than the purification system with hydrogen; 

    ② Expenditure of the material consumption is more than the purification system with hydrogen; 

    ③ The reaction temperature and heating power are higher than the purification system with hydrogen.


Introduce

Purification device of carbon-removed oxygen

相关推荐
最专业的品牌服务,为您创作更高的价值
Copyright (2019-2021) Guangzhou Weiton Industrial Gas Technology Co., Ltd.
Rhino Cloud Provides Enterprise Cloud Services
犀牛云提供云计算服务
X
3

SKYPE 设置

4

Ali Wangwang

2

MSN设置

5

Mobile

  • 13503031632
6

QR code

等待加载动态数据...

等待加载动态数据...

TOP
展开